Question:
How do I view the console events when connected to the NetVanta 1560 CLI?
Answer:
Real-time port status changes are not seen in the ASE switch console or CLI connections.
The command #sh logging will display the interface logs showing these events.
Switch# sh logging
Switch logging host mode is disabled
Switch logging host address is null
Switch logging level is informational
Number of entries on Switch 1:
Error : 0
Warning : 0
Notice : 5609
Informational: 9
All : 5618
ID Level Time & Message
---------- ------------- --------------
1 Informational 1969-12-31T18:00:37-06:00
SYS-BOOTING: Switch just made a cold boot.
...
8 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to up.
9 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to up.
10 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/1, changed s
tate to up.
11 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/24, changed
state to up.
12 Notice 1969-12-31T18:00:43-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to down.
13 Notice 1969-12-31T18:00:46-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to up.
14 Notice 1969-12-31T18:00:48-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/1, changed s
tate to down.
15 Notice 1969-12-31T18:00:50-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/1, changed s
tate to up.
16 Notice 1969-12-31T18:00:51-06:00
LINK-CHANGED: Interface GigabitEthernet 1/1, changed
state to up (MEP).
17 Notice 1969-12-31T18:00:51-06:00
LINK-CHANGED: Interface GigabitEthernet 1/2, changed
state to up (MEP).
