cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Q&A - How do I view the console events on the NetVanta 1560/ASE switch?

Q&A - How do I view the console events on the NetVanta 1560/ASE switch?

Question:

How do I view the console events when connected to the NetVanta 1560 CLI?

 

Answer:

Real-time port status changes are not seen in the ASE switch console or CLI connections.

The command #sh logging will display the interface logs showing these events.

 


Switch# sh logging
Switch logging host mode is disabled
Switch logging host address is null
Switch logging level is informational

Number of entries on Switch 1:
Error : 0
Warning : 0
Notice : 5609
Informational: 9
All : 5618

ID Level Time & Message
---------- ------------- --------------
1 Informational 1969-12-31T18:00:37-06:00
SYS-BOOTING: Switch just made a cold boot.

...

8 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to up.

9 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to up.

10 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/1, changed s
tate to up.

11 Notice 1969-12-31T18:00:42-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/24, changed
state to up.

12 Notice 1969-12-31T18:00:43-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to down.

13 Notice 1969-12-31T18:00:46-06:00
LINK-UPDOWN: Interface Vlan 1, changed state to up.

14 Notice 1969-12-31T18:00:48-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/1, changed s
tate to down.

15 Notice 1969-12-31T18:00:50-06:00
LINK-UPDOWN: Interface GigabitEthernet 1/1, changed s
tate to up.

16 Notice 1969-12-31T18:00:51-06:00
LINK-CHANGED: Interface GigabitEthernet 1/1, changed
state to up (MEP).

17 Notice 1969-12-31T18:00:51-06:00
LINK-CHANGED: Interface GigabitEthernet 1/2, changed
state to up (MEP).

Labels (3)
Version history
Last update:
‎10-28-2020 08:23 AM
Updated by: