How do you find the serial number of a NetVanta 1560 series switch?
There are five methods for locating the serial number on your NetVanta 1560 Series switch:
Method One: The sticker on the bottom of the switch will provide the serial number and much more information.
Method Two: The box the switch came in, if you still have it, also has a baled with the same serial number on the top.
Method Three: Access the switch's web interface and navigate to the System tab. Then, select Information.
Method Four: Connect to the NetVanta 1560 CLI (using Telnet, SSH, or Console), and follow these steps:
NV1560-24>enNV1560-24#platform debug allow
WARNING: The use of 'debug' commands may negatively impact system behavior.Do not enable unless instructed to. (Use 'platform debug deny' to disabledebug commands.)NOTE: 'debug' command syntax, semantics and behavior are subject to changewithout notice.
2. Next, enter the debug factory command to display system information for the switch, including the serial number.
NV1560-24#deb factoryMAC Address: 00-24-45-xx-xx-xxSerial Number : LBADTN1914AE314HW Version : P2APart Number : 17108124PF2Fan High Threshold : 300Fan Low Threshold : 280NV1560-24#
Method Five: With firmware v4.4-44 and newer, connect to the NetVanta 1560 CLI (using Telnet, SSH, or Console), and follow this step: