Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
andrewl
New Contributor
‎11-26-2015 06:47 PM

Adtran 838T not passing traffic when efm-group 1/0/2 linked up

I'm having some issues getting a NetVanta 838T configured w/ two efm-groups.

The goal is to have the 838T feeding 2 834T's in the field. So far I have got the first one stood up and working like a champ, although as soon as I try to bring up the second one, the 838T stops receiving traffic over the efm-links. Using wireshark, I see traffic received off the ethernet port of the 834T, although when looking at my counters, I see the TX incrementing on the efm-link on the 834T, but I don't see the RX incrementing on either efm-link on the 838T.

Attached are the configs for the 838T and one of the 834T's. I'm sure it's something simple I'm missing.

Thanks.

Any help would be much appreciated.

Adtran Site-A.txt.zip
Adtran Site-C.txt.zip
0 Kudos
Reply
1 Reply
andrewl
New Contributor
‎12-01-2015 10:39 PM

Re: Adtran 838T not passing traffic when efm-group 1/0/2 linked up

I ended up working w/ support, and after upgrading code, the issue had been corrected.

What was interesting is that support tried to recreate the issue in the lab, and couldn't.

0 Kudos
Accept as Solution Reply