BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
runc
New Contributor

Need help setting up a secure hub

Jump to solution


I'm trying to set up a secure VTC hub using a ADTRAN 830, KIV-7, and Tandberg VTC unit.    I was will be using primary rate ISDN.

I was hoping you can provide me with the configurition for the adtran, KIV, and tandberg.

Thanks

Bryan

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Need help setting up a secure hub

Jump to solution

We have a quick guide for the recommended settings for the ATLAS with a Video module here (https://supportforums.adtran.com/docs/DOC-5981). I'm afraid ADTRAN does not have any guides for configuring a KIV or a Tandberg.

Hope this helps,

Patrick

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Need help setting up a secure hub

Jump to solution

We have a quick guide for the recommended settings for the ATLAS with a Video module here (https://supportforums.adtran.com/docs/DOC-5981). I'm afraid ADTRAN does not have any guides for configuring a KIV or a Tandberg.

Hope this helps,

Patrick

0 Kudos