cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
drjarmon
New Contributor III

non-802.11 interference detected

Several of the BSAP-1840 are reported BG channel interference.  Before chasing the air ways just wondering if there is an alternative troubleshooting.

Model BSAP-1840

Firmware 6.8.0-18

Channel b/g/n (2.4 GHz) Auto

BG radio: non-802.11 interference detected - change the channel and then reboot the AP.

Thanks

0 Kudos
1 Reply
Anonymous
Not applicable

Re: non-802.11 interference detected

Don,

I would suggest upgrading to vWLAN version 2.6.2 on both the controller and APs. In vWLAN 2.4, this message could appear for many reasons, but it was not always non-802.11 interference. We have refined that code in a recent release and it should give you a better indication of whether these is an issue you will need to check into.

Please see our Upgrading BlueSocket vWLAN Controllers and Access Points‌ guide for more information.

Thanks,

Evan

ADTRAN TSE