cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DSU III DBU AT Commands

DSU III DBU AT Commands

Article ID: 1590
Q&A

  DSU III DBU AT Commands


Q:

DSU III DBU AT Commands

A:

The following chart can also be found in the DSU III DBU User Manual.

CommandTitleDefault
A/Re-execute Commandnone
ATAAnswernone
ATDnDial Numbernone
ATEEcho Command1
ATHHang Up Callnone
ATOGo Onlinenone
ATQnResult Code Display0
ATSn?Read S-Registernone
ATSn=xWrite to S-Registernone
ATVnResult Code From Firmware1
ATZSelf Testnone
AT&CnDCD Option0
AT&DnDTR Option0
AT&FnRestore Factory Optionsnone
AT&KnFlow Controlnone
AT&LnNetwork Type0
AT&QnDTE Data Format0
AT&RnCS Options0
AT&SnSR Options0
AT&TnTest Commands0
AT&VView Current Configurationnone
AT&XnTransmit Clock0
AT&Zn=xStore Phone Numbernone
AT\NnMNP Option (V.32 DBU)0
AT\TnInactivity Timer
AT%BnLoop Rate Select0
AT%CnCompress Option (V.32 DBU)0
AT%KnDTE Rate Select
AT%PPassword Control0
AT%P=xPassword Entry0
T%P>xPassword Verify0
AT%RxInitiate Remote Config.
AT%TnAnti-stream Option0
AT_AnLLB Control0
AT_BnDBU Number to Dial0
AT_CnSR Control During Test0
CommandTitleDefault
AT_DnRTS-CTS Delay0
AT_EnDBU Originate/Answer0
AT_FnScrambler Control0
AT_GnDBU When OOS0
AT_HnDBU When No RX Signal0
AT_InDBU When No Sealing Current0
AT_JnAuto Answer Enable/Disable0
AT_KnDBU Enable/Disable0
AT_LnDTE Routing Main/Backup0
AT_N=xxSet Network Addressnone
AT_PnFront Panel Enable/Disable0
AT_RRLB Enable/Disable0
AT_S=xxSet Serial Numbernone
AT_TnSelect Test Pattern0
AT_XnClock Source Select0
AT_YnSecondary Channel Rate Select0
AT&T10Local DTE & Loopnone
AT&T11Local Loop Onlynone
AT&T1Local DTE Onlynone
AT&T8Local DTE with TPnone
AT&T9Local Test Patternnone
AT&T0Exit Testnone
AT_T0&T7Remote test using 2047 patternnone
AT_T1&T7Remote test using 511 patternnone
AT_T2&T7Remote test using stress PTRN #1none
AT_T3&T7Remote test using stress PTRN #2none
AT_T4&T7Remote test using stress PTRN #3none
AT_T5&T7Remote test using stress PTRN #4none
AT_T0&T8Local test using 2047 patternnone
AT_T1&T8Local test using 511 patternnone
AT_T2&T8Local test using stress PTRN #1none
AT_T3&T8Local test using stress PTRN #2none
AT_T4&T8Local test using stress PTRN #3none
AT_T5&T8Local test using stress PTRN #4none
AT&T6Remote test using data from DTEnone


Version history
Revision #:
1 of 1
Last update:
‎02-28-2012 02:13 PM
Updated by:
 
Contributors