DSU III S4W AT Commands

[#1]

	Article ID: 1592
Q&A

  DSU III S4W AT Commands

---

Q:

DSU III S4W AT Commands

A:

The following chart can also be found in the DSU III S4W User Manual.

Command Title Default A/ Re-execute Command none ATA Answer none ATDn Dial Number none ATE Echo Command 1 ATH Hang Up Call none ATO Go Online none ATQn Result Code Display 0 ATSn? Read S Register none ATSn=x Write to S Register none ATVn Result Code Form 1 ATZ Reset none AT&Cn DCD Option 0 AT&Dn DTR Option 0 AT&Fn Restore Factory Options none AT&Kn Flow Control none AT&Ln Network Type 0 AT&Qn DTE Data Format 0 AT&Rn CS Options 0 AT&Sn SR Options 0 AT&Tn Test Commands 0 AT&V View Current Configuration none AT&Wn Store User Profile 0

Command Title Default AT&Xn Transmit Clock 0 AT&Yn Power Up User Profile 0 AT&Zn=x Store Phone Number none AT\Tn=x Inactivity Timer AT%Bn Loop Rate Select 0 AT%Kn DTE Rate Select AT%P Password Control 0 AT%P=x Password Entry 0 AT%P>x Password Verify 0 AT&R Initiate Remote Config. AT_An LLB Control 0 AT_Bn DBU Number to Dial 0 AT_Cn SR Control During Test 0 AT_Dn RTS-CTS Delay 0 AT_En DBU Originate/Answer 0 AT_Fn Scrambler Control 0 AT_Jn Auto Answer Enable/Disable 0 AT_N=xx Set Network Address none AT_Pn Front Panel Enable/Disable 0 AT_Rn LB Enable/Disable 0 AT_S=xx Set Serial Number none AT_Tn Select Test Pattern 0 AT_Xn Clock Source Select 0