Day of Week: Select the day/evening you plan to run this task.
Run From: You can have this run all day to ensure all devices have their remote WAN access disabled.
Filter Criteria: You can use the Available Columns list to search for the filter. It could be based on MAC address, label, firmware version, or the entire subscriber list.
All other settings can remain at the defaults.
Verifying the ACS Global Setting for WAN Access
The Access Control global parameter in MOSAIC Device Manager controls whether WAN HTTP/HTTPS access is on by default in deployed units. You can check this setting by going to Utilities -> JSON Editor and then setting the Edit Globals operation. Then search for AccessControl. WAN should be set to False. If it is not, ADTRAN recommends changing this option and then running a job to disable WAN side HTTP/HTTPS on all units.
Optional: Create an ACL to block HTTP/HTTPS traffic to your devices
While ADTRAN recommends disabling WAN HTTP/HTTPS access to SmartOS devices, if you require this functionality ADTRAN recommends doing one of the following:
Add an ACL in your edge router to block HTTP/HTTPS access from outside of your network.
Create an ACL on the SmartOS device to limit what source IP addresses can access the RG on those ports.