cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

How to reflash the firmware on the AP 160 ?

Hello, I'm new to the forum and also new to Adtran.

I have an AP 160 and the status shows as Recovery, I did a search and apparently i need to reinstall the firmware.

so I was wondering If there was a guide, video, or if anyone would be able to explain step by step.

thank you

0 Kudos
Reply
4 Replies
Highlighted
New Contributor

Re: How to reflash the firmware on the AP 160 ?

Does anyone know how to resolve the Recovery Status issue?

thank you

0 Kudos
Reply
Highlighted
Anonymous
Not applicable

Re: How to reflash the firmware on the AP 160 ?

ADTRAN offers a guide ‘Upgrading Firmware on an ADTRAN Netvanta 160 Series Unit in Recovery Mode’:

https://supportforums.adtran.com/docs/DOC-5791

If you have any questions please let us know.

Regards,

Donna

0 Kudos
Reply
Highlighted
New Contributor

Re: How to  reflash the firmware on the AP 160 ?

Hi, thank you very much, I didn't really understand the part where it says that i can use the web Interface with a temporary |.

would someone be able to explain.

thank you

0 Kudos
Reply
Highlighted
Anonymous
Not applicable

Re: How to reflash the firmware on the AP 160 ?

Thank you for catching a typo in the document. I will have this addressed. The line you mention should say "In Recovery mode, the AP can be upgraded using the ADTRAN command line or Web Interface with a temporary IP."

If you have any additional questions please let us know.

Regards,

Donna

0 Kudos
Reply