BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
wva
New Contributor

Having trouble updating firmware in bootstrap, any suggestions?

I had to remove the file system of the netvanta 1224 ST POE. I have been following the documentation to load a new firmware from a tftp server. I have been this far been unsuccessful on copying the new firmware to flash. It times out every time. I am using a tftp server program by solar winds on my laptop that I have connected to the console port. I am also using Putty. I have also tried to copy the firmware using xmodem, but get a message that I have to be connected through the console (which I have). I have also tried. configured the port (1) that the switch is plugged into either my laptop or another switch with an IP and static route. I have also tried a few different versions, but all have failed to upload.

Please help!

Thanks in advance

0 Kudos