cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cardenar
New Contributor

Inherited LAN and don't know IP of switches.

Jump to solution

How do find the IP of switches when there is no local documentation? I 've tried CLI, it own't respond. I've tried in Browser to 30 different IP's that it could be and no response.My DHCP gives me 2 IP's labled "switch" but those IP's don't respond. Any ideas?

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Inherited LAN and don't know IP of switches.

Jump to solution

@cardenar - The default management IP address of all NetVanta switches are 10.10.10.1. However, it seems in your case, these switches do not have the default configuration currently set on them. Your best bet is to obtain a straight-through serial cable to console into the switch. Once you have this cable, follow the instructions in the thread linked below. It will explain how you can access the configurations of these switches using the backdoor method of going through bootstrap. Once you are able to view the configuration, you can figure out which IP address the switches are using and even reset the password if you need to.

Re: How to recover password for Adtran 1224-ST

Let us know if you have any further questions.

Thanks,

Noor

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: Inherited LAN and don't know IP of switches.

Jump to solution

@cardenar - The default management IP address of all NetVanta switches are 10.10.10.1. However, it seems in your case, these switches do not have the default configuration currently set on them. Your best bet is to obtain a straight-through serial cable to console into the switch. Once you have this cable, follow the instructions in the thread linked below. It will explain how you can access the configurations of these switches using the backdoor method of going through bootstrap. Once you are able to view the configuration, you can figure out which IP address the switches are using and even reset the password if you need to.

Re: How to recover password for Adtran 1224-ST

Let us know if you have any further questions.

Thanks,

Noor

View solution in original post

0 Kudos