cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jimwhite
New Contributor II

What T1 interface card to use

Jump to solution

We have three new 1234 switches.  We note these have four slots for interfaces other than Ethernet.  We would like to use them to replace CISCO 1840's in our network which provide a router function between local IP networks and leased T1 lines that connect them in a private network.

1) Can the 1234 switch with the appropriate plug in module provide router functionality (address translation) between a local IP network and a leased T1?

2) If so what is the correct plug in device to use to connect to the leased T1 at B8ZS ?

Jim

Labels (1)
Tags (2)
0 Kudos
1 Solution

Accepted Solutions
jayh
Honored Contributor
Honored Contributor

Re: What T1 interface card to use

Jump to solution

Those are SFP slots for gigabit optical links.  They're Ethernet, but they require an SFP plug-in module typically used for a fiber-optic connection

Two of them are shared with the two copper RJ-style gigabit interfaces, in other words you can use a copper UTP connection to the conventional plug, or an optical SFP plug-in module, but not both.

The other two are stand-alone gigabit modules for optical Ethernet links.

There are a number of SFP modules available for different types of fiber-optic cables, and there's even a RJ-style SFP if you need four gigabit copper connections.  These aren't for T-1 connections, however.

The 1234 switch has very limited IP routing capability and doesn't support T1 connections.

The 1335 series switch/router has a NIM slot capable of accepting a variety of modules including those that will support one or two T1 lines as well as full router/firewall/VPN functionality. This would be a good choice for an integrated 24-port switch, router, firewall, and NAT appliance in a 1U space.

View solution in original post

0 Kudos
3 Replies
jayh
Honored Contributor
Honored Contributor

Re: What T1 interface card to use

Jump to solution

Those are SFP slots for gigabit optical links.  They're Ethernet, but they require an SFP plug-in module typically used for a fiber-optic connection

Two of them are shared with the two copper RJ-style gigabit interfaces, in other words you can use a copper UTP connection to the conventional plug, or an optical SFP plug-in module, but not both.

The other two are stand-alone gigabit modules for optical Ethernet links.

There are a number of SFP modules available for different types of fiber-optic cables, and there's even a RJ-style SFP if you need four gigabit copper connections.  These aren't for T-1 connections, however.

The 1234 switch has very limited IP routing capability and doesn't support T1 connections.

The 1335 series switch/router has a NIM slot capable of accepting a variety of modules including those that will support one or two T1 lines as well as full router/firewall/VPN functionality. This would be a good choice for an integrated 24-port switch, router, firewall, and NAT appliance in a 1U space.

0 Kudos
jimwhite
New Contributor II

Re: What T1 interface card to use

Jump to solution

OK, thanks.

Jim

Anonymous
Not applicable

Re: What T1 interface card to use

Jump to solution

-

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor