Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
NetworkTech2016
New Contributor
‎02-06-2023 05:06 PM

snmp agent -- unknown command

Jump to solution

We have an old Gen1 1238 that we are trying to poll SNMP data from. When attempting to enable the SNMP Agent by typing "snmp agent" the message returned is "Unrecognized command". Typing "snmp agent" in a 1550 works.

Anyone know if there's a different method to enable the SNMP Agent for a 1238?

0 Kudos
Reply
1 Solution

Accepted Solutions
NetworkTech2016
New Contributor
‎02-13-2023 12:01 PM

Re: snmp agent -- unknown command

Jump to solution

I discovered the proper command for the 1238: ip snmp agent is used on the old 1238 switches. When doing a recent comparison between the 1238 and a more modern switch, I noticed the 1238 had a line which stated "no ip snmp agent". Not sure what the difference is between "ip snmp agent" and "snmp agent", but at least snmp polling is working.

View solution in original post

0 Kudos
Reply
1 Reply
NetworkTech2016
New Contributor
‎02-13-2023 12:01 PM

Re: snmp agent -- unknown command

Jump to solution

I discovered the proper command for the 1238: ip snmp agent is used on the old 1238 switches. When doing a recent comparison between the 1238 and a more modern switch, I noticed the 1238 had a line which stated "no ip snmp agent". Not sure what the difference is between "ip snmp agent" and "snmp agent", but at least snmp polling is working.

0 Kudos
Reply