cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ing_gomez_clevermx
New Contributor III

PoE ports issues

Jump to solution

Hello, I would like to know if someone has presented issues using the PoE ports with IP cameras.

I will perform an implelemtation using some NV1335  / 1544 and Mobotix cameras.

regardS

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: PoE ports issues

Jump to solution

As long as the attached IP Camera's are 802.3af compliant as far as power is concerned, you shouldn't have any issues. The 1335 has no idea what type of device is attached (camera, phone, magnetic door opener, etc) or what manufacturer it is, it only knows the amount of power being asked of it on that port. As long as the power requirement is within the 1335's capability (15.4W max per port), you should be good to go.

View solution in original post

5 Replies
vmaxdawg05
Contributor III
Contributor III

Re: PoE ports issues

Jump to solution

With reference to the 1335, I have not had any issues with IP cameras as long as they adhere to 802.3af standard.  I have run into problems with cameras that draw more power.  These are usually PTZ IP cameras with fans.  In that case, you may need to use a PoE power supply.  What kind of issue are you having?

ing_gomez_clevermx
New Contributor III

Re: PoE ports issues

Jump to solution

At this time I haven't install the cameras, but the provider toldme that the cameras stoped working with some switches.

The reason to post the question, was to know if someone experienced issues to take precautions.

Appreciate the answer, and the time.

Regards

vmaxdawg05
Contributor III
Contributor III

Re: PoE ports issues

Jump to solution

Some switches have a PoE budget which means that all ports are capable of PoE, but the switch has limited power, and may not be able to power devices on all the ports at the same time. The 1335 does not budget power, it is capable of powering all 24 ports at maximum 802.3af power (15.4W).

I’ve had no problems with the 1335 units that I’ve deployed.

R\

Anonymous
Not applicable

Re: PoE ports issues

Jump to solution

As long as the attached IP Camera's are 802.3af compliant as far as power is concerned, you shouldn't have any issues. The 1335 has no idea what type of device is attached (camera, phone, magnetic door opener, etc) or what manufacturer it is, it only knows the amount of power being asked of it on that port. As long as the power requirement is within the 1335's capability (15.4W max per port), you should be good to go.

Anonymous
Not applicable

Re: PoE ports issues

Jump to solution

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,


Levi