cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
bremmer
New Contributor III

Creating port-channels in an active-chassis stack

Jump to solution

We have four Netvana 1638 stacks using active-chassis. I will have two 10Gig uplinks, one from top switch in a stack and one from bottom switch in the same stack, to two redundant core switches. Can I put these two ports on two different switches in the same active-chassis stack in the same port-channel thereby using the bandwidth of both connections instead of STP blocking one of the redundant links? The core switches will have their own port-channels in an MLAG.

Thanks,

0 Kudos
1 Solution

Accepted Solutions
bremmer
New Contributor III

Re: Creating port-channels in an active-chassis stack

Jump to solution

I have marked this "assumed answered", I found what I was looking at this link: ActivChassis Setup/Design/Maintenance Tips and Best Practices

View solution in original post

0 Kudos
1 Reply
bremmer
New Contributor III

Re: Creating port-channels in an active-chassis stack

Jump to solution

I have marked this "assumed answered", I found what I was looking at this link: ActivChassis Setup/Design/Maintenance Tips and Best Practices

0 Kudos