Hello, our company has Adtran Switch Model NetVanta 1531P. These are used to control our Wifi wireless endpoints. We are seeking to be able to access the activity and usage monitoring functionality of our NetVanta.
I have never worked with this device before. I have begun to reference some of the online support and help functionality for this switch. Using these online instructions, I am not making an progress toward accessing the switches monitoring functionality. I have looked at other comments, questions and issues related to this, and I am still confused.
The manual asks that you access by your browser, inputting IP: 10.10.10.1 to access monitoring utilities in the NetVanta switch. I have done this and have had no luck connecting onto this utility. Can anyone with experience with this device point out if there are missing steps that are implied for an expert, yet not stated that I should know of? Any amount of help with this would be appreciated.
Thank you, Scott
Refresh to top, any help would be appreciated... Thank you, Scott
Scott-
In a default config, interface vlan 1 (i.e. untagged) is configured to get an ip address via DHCP, as an alternative if it cannot, then the default config has the backup ip of 10.10.10.1 for access to the web or ssh.
If you have the switch plugged in to your network, you will want to find what IP address has been assigned from your DHCP server. You can then use that IP address to access the web gui for configuration.
If it is not on your network and you are connected directly to the switch, you need to change the IP address of your computer to 10.10.10.2 you will then be able to access the web gui via 10.10.10.1
default username and password are admin and password
If neither of the above works, you will likely need to get a console cable and do a console session into the box to look at the config to see ip addressing and if the GUI functionality is enabled.