cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
drjarmon
New Contributor III

Windows 10 LLDP: Speed Duplex mis-match

Looking for suggestions for LLDP settings for Ports connected to Windows 10 desktops.

Windows 10 Microsoft LLDP Protocol Driver results in continuous LLDP: Speed Duplex mis-match events:

2017.03.17 07:09:41 LLDP LLDP: Speed Duplex mis-match on giga-swx 0/48. Speed/Duplex: "1G/full-duplex" Neighbor Speed/Duplex: "? duplex"

2017.03.17 07:25:26 LLDP LLDP: Speed Duplex mis-match on giga-swx 0/48. Speed/Duplex: "1G/full-duplex" Neighbor Speed/Duplex: "? duplex"

2017.03.17 07:41:11 LLDP LLDP: Speed Duplex mis-match on giga-swx 0/48. Speed/Duplex: "1G/full-duplex" Neighbor Speed/Duplex: "? duplex"

2017.03.17 07:56:56 LLDP LLDP: Speed Duplex mis-match on giga-swx 0/48. Speed/Duplex: "1G/full-duplex" Neighbor Speed/Duplex: "? duplex"

Thanks

Don

Labels (1)
0 Kudos
1 Reply
jayh
Honored Contributor
Honored Contributor

Re: Windows 10 LLDP: Speed Duplex mis-match

This is almost certainly a cosmetic bug. We have seen it with Polycom phones as well as a few other devices.

First verify that there is indeed no actual duplex issue on the port. Look at the output of "show interface" for incrementing CRC errors, collisions, late collisions and runts. Log on to the Windows box on the other side of the link and verify that it shows the same speed and duplex that the switch is reporting.

You can either turn off LLDP completely on the port or suppress the mis-reported data with the interface-level command no lldp receive 802.3-info mac-phy-config .