Which protocol to use for RTMP streaming when I create Port Forward?

[james-in-ca]

Adtran Netvanta  3120

I am using an Application called Wowza to serve and stream live video from a facility.

I need to forward and open port 1935 to allow access to the stream served from that machine from outside.

I watched the video here

[video] Configuring a Port Forward in AOS (NetVanta)

My interface is a bit different, but I have followed along with no success accessing the stream from outside.

I am trying to map a certain public IP to open an RTMP video stream on a certain computer on a certain port. Like this:

rtmp://x.x.x.x:1935/[appname]/[streamname]/

• I have set one of my public IPs as a secondary IP in the IP Interfaces section
• I have a static internal IP on the server here.
• I can access  and play the stream from the server locally using local IP syntax
• I can ping the public IP from another network
• How can I determine if that IP is reaching/pinging the machine:port I want it to?

When I create the Port Forward in the Security Zone (Public) , New Policy interface which protocol should I choose?

this may be my issue?

Thank you for any assistance.

James

[jayh · Accepted solution]

Select TCP, and 1935 as the matching port (without port translation). Depending on your setup, you might also have to forward port 80 or 443.

[james-in-ca]

Thanks worked fine! Only had to use 1935 for this particular setup i.e; Wowza server.