Enabling MPLS on a NV3200

[davidsg]

Hi,

I have a point-to-point T1 connection using NV3200's.  I am upgrading to an MPLS (not an MPLS VPN) connection.  Is there any additional hardware required to run MPLS with QOS or is it all AOS configuration related?

thank you,

David

[Anonymous · Accepted solution]

:

Thank you for asking this question in the support community.  AOS units are not aware of MPLS, so there aren't any MPLS specific configuration or hardware changes necessary when migrating to MPLS.  The only changes that may need to be made are minor, and the ISP should indicate what they are.

The changes might be related to IP interfaces (Ethernet or T1), IP addresses, and default-routes, but again there is no additional hardware needed, nor are there any MPLS features that need to be "enabled."

Please, let me know if you have any additional questions.  I will be happy to help in any way I can.

Levi

[Anonymous]

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi

[Anonymous]

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor