Azure Site to Site VPN with Netvanta 3430

[jessepdx]

i've tried setting up Azure VPN to my 3430 with no luck.

Adtran isn't on the Known Compatible device list , but i tried anyway.

has anyone else had luck with this?

i've included the sample cisco setup cfg and i've done my best to match it to the Adtran

i can't get past IKE

[Anonymous]

- Thanks for posting your question on the forum!

AOS should be able to successfully establish VPN tunnels to those devices that meet IPSec standards. Could you post your Adtran configuration (remember to remove any sensitive information) and also the output to "debug crypto ike" on the Adtran when you attempt to establish the VPN tunnel?

Let us know if you have any questions.

Thanks,

Noor

[Anonymous]

-

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you have any additional information on this that others may benefit from, please come back to this post to provide an update. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor

[jessepdx]

Thank you, I haven't had time to revisit this yet.

Sent from a tracking device that can make phone calls.

On Jul 10, 2014 1:19 PM, "noor" <adtran@adtran.hosted.jivesoftware.com>

[mtrutledge]

Does anyone have instructions on how to do this?

[anchor]

Any update?  I can't get past IKE

[anchor]

I'm happy to work it out with you.  Can't get it to work...

[anchor · Accepted solution]

I figured it out. 

You have to use Policy-based VPN connection on the Azure side.  AOS doesn't support IKEv2 as of this post.