Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jallen2020
New Contributor
‎04-12-2016 04:18 PM

Netvanta vs. Total Access

Adtran n00b here, so this might be a dumb question.  Can someone explain to me the scenarios wehre you would want to use the Netvanta Line vs. the Total Access Line?  From my initial reading, it looks like there is a lot of overlap between these two lines.

Is it that Netvanta's are more modular than the Total Access lines?

Can the Netvanta line handle more throughput so they are better for Ethernet CPEs of speeds over 100megs, etc?

Just looking for some clarity.

Labels (2)
Labels
0 Kudos
Reply
1 Reply
jayh
Honored Contributor
Honored Contributor
‎04-13-2016 01:29 PM

Re: Netvanta vs. Total Access

It's primarily a marketing thing. Most Adtran products are either only in the Netvanta line only or in the Total Access line only. There are a few that are very close to being the same thing but with a few very slight differences.

A Netvanta 6240 is essentially the same thing as a TA900 for example. There are a few differences such as an extra FXO and I think socketed RAM on the Netvanta 6240 but check the data sheet to be sure. There may also be some differences in warranty terms.

0 Kudos
Accept as Solution Reply