cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

how can i allow port 5060 to pass through to local ip address from a public ip address.

Jump to solution

i set up sip proxy but not sure it is set correctly. also set port forward in firewall security zone.


Labels (2)
Tags (3)
0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Honored Contributor
Honored Contributor

Re: how can i allow port 5060 to pass through to local ip address from a public ip address.

Jump to solution

Usually you will want to do one or the other of those, not both.  Sip proxy transparent is where I would start, without the port-forward. 

First make sure your firewall is configured correctly for NAT, you can surf the web from the inside zone, etc.  Then enable ip sip, ip sip proxy, ip sip proxy transparent.

Don't forget to put "media-gateway ip primary" in the interface configuration both inside and outside. 

View solution in original post

2 Replies
Highlighted
Honored Contributor
Honored Contributor

Re: how can i allow port 5060 to pass through to local ip address from a public ip address.

Jump to solution

Usually you will want to do one or the other of those, not both.  Sip proxy transparent is where I would start, without the port-forward. 

First make sure your firewall is configured correctly for NAT, you can surf the web from the inside zone, etc.  Then enable ip sip, ip sip proxy, ip sip proxy transparent.

Don't forget to put "media-gateway ip primary" in the interface configuration both inside and outside. 

View solution in original post

Highlighted
Anonymous
Not applicable

Re: how can i allow port 5060 to pass through to local ip address from a public ip address.

Jump to solution

:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi

0 Kudos