cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
d3ntr1k1n
New Contributor

BGP statements in R10.9.6

Hello,

A 4430 router running AOS 18.02.04.00.E failed, and I'm replacing it with a 4430 running R10.9.6.

This is the BGP statement in the original config (redacted some network info).

!
router bgp 65xxx
no auto-summary
no synchronization
network 10.x.x.x mask 255.x.x.0
neighbor 172.x.x.x
   no default-originate
   soft-reconfiguration inbound
   remote-as 65000
!

I used the same config on the previous router for the new router. Loaded it through the GUI with no changes. This is what the running config shows for BGP after:

!
router bgp 65xxx
neighbor 172.x.x.x
   remote-as 65000
   shutdown
   exit
!

I saw other posts to the effect that AOS deprecated some BGP commands, etc.

Does this second section perform the same functionality? Some of the lines deleted in 'sh output-errors' don't seem important, others do though (the 'network' line for example...)

Thanks for the help, the 4430 is not a model I use often.

Labels (2)
0 Kudos
1 Reply
d3ntr1k1n
New Contributor

Re: BGP statements in R10.9.6

Answered in an Adtran support ticket, marking as resolved, thanks.

It should read:

router bgp 65xxx
   neighbor 172.x.x.x
     remote-as 65000
    no shutdown

     exit

   address-family ipv4

     network 10.x.x.x mask 255.x.x.0

     neighbor 172.1.1.1

       soft-reconfiguration inbound

       no shutdown

       exit

     exit