cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
wally
New Contributor

Bandwidth Throttling on NetVanta 4430

I have created a QoS map to limit bandwidth via an ACL with the intent of limiting a backup job that runs across the VPN to 20 Mbps, otherwise it sucks up all available bandwidth.  When I try to apply this map as the outbound policy on the Subinterface that is part of the VPN, I get the following error:

"Can not set a qos map which requires bandwidth to this sub interface. "

I tried to get cute and make the map a child of a different map I use to prioritize VoIP - but that didn't work.  I tried applying the map to the giga-eth0/1 interface (sub interface is giga-eth0/1.1), and it will take it - but I get no hits on it.  What am I missing?

Thanks in advance.

Labels (2)
Tags (2)
0 Kudos
2 Replies
Anonymous
Not applicable

Re: Bandwidth Throttling on NetVanta 4430

@wally - Could you reply to this post with the configuration you are having issues with? Please remember to remove any sensitive information.

Thanks,

Noor

Anonymous
Not applicable

Re: Bandwidth Throttling on NetVanta 4430

Wally:

I marked this post as "assumed answered," but please do not hesitate to reply if you have further questions.

Levi