BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cbycondo
New Contributor

Inter VLAN Rouring issue 4305/1234

I am trying to route traffic Inter VLAN.  Th config is a 1234 switch attached to a 4305.  The address / subnets I need to route between

are 10.0.0.0 and 10.0.2.0 subnets.  They are on VLAN 2 and 4 and are both secondary addresses.  I have put in the necessary definitions and also

Firewall rules but it is not working - am I missing something?

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Inter VLAN Rouring issue 4305/1234

Are the ports between the switch and the router setup as trunk ports? Are you allowing all vlans on the trunks ports or only specific ones and if so have you added the 2 new vlans? Are you able to ping the gateway address for either of those vlans from your main vlan?

Re: Inter VLAN Rouring issue 4305/1234

I now have is 98% working.  My issue it turn out was routing on the actual hosts.

I have multiple subnets on some of my VLANS because of the requirement of the hosts and I was missing gateway routing for those subnets.

I also had an issue with Ubuntu because they have made it harder to manually program the interfaces and routes.