Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
erich
New Contributor
‎10-15-2014 01:16 PM

QoS Config Check

I am new to Adtran so I would like someone to verify my QoS settings if possible.

Here's what I have.

ADTRAN, Inc. OS version R10.9.3.E

Mainline Version: ENM.13.100

Boot ROM version 17.04.01.00

Platform: NetVanta 4430, part number 1700630E1

Flash: 33554432 bytes  DRAM: 268435455 bytes

_______________________________________________________

qos map Template-4 10

  match precedence 5

  priority percent 59

qos map Template-4 20

  match precedence 2

  match precedence 3

  bandwidth percent 15

qos map Template-4 30

  match precedence 0

  match precedence 1

  bandwidth percent 14

qos map Template-4 40

  match precedence 4

  match precedence 6

  match precedence 7

  bandwidth percent 10

!

qos map setprecedence 10

  ! Implicit deny any

  set precedence 7

qos map setprecedence 20

  match dscp 48

  match dscp cs6

  set precedence 6

qos map setprecedence 30

  match dscp ef

  match ip list LW-Voice

  set precedence 4

qos map setprecedence 40

  match dscp af41

  match ip list LW-Video

  match precedence 3

  set precedence 2

qos map setprecedence 50

  match dscp 25

  match dscp 26

  match dscp 24

  match dscp af31

  match dscp cs3

  match ip list LW-Signal

  set precedence 6

qos map setprecedence 60

  match dscp af21

  match ip list LW-Data

  set precedence 5

qos map setprecedence 70

  match dscp 10

  match dscp 8

  match dscp af11

  match dscp cs1

  set precedence 1

qos map setprecedence 80

  match dscp 0

  set precedence 0

!

qos map 10Meg-QOS 10

  match any

  shape average 10500000 burst 1200000 count-eth-overhead

  qos-policy Template-4

!

qos map 20Meg-QOS 10

  match any

  shape average 20900000 burst 1200000 count-eth-overhead

  qos-policy Template-4

!

qos map 10Meg 10

  match any

  shape average 10500000 burst 1200000 count-eth-overhead

!

qos map 20Meg 10

  match any

  shape average 20900000 burst 1200000 count-eth-overhead

!

qos map 30Meg 10

  match any

  shape average 31400000 burst 1200000 count-eth-overhead

!

qos map 40Meg 10

  match any

  shape average 41800000 burst 1200000 count-eth-overhead

!

qos map 50Meg 10

  match any

  shape average 52300000 burst 1200000 count-eth-overhead

!

qos map 60Meg 10

  match any

  shape average 62760000 burst 1200000 count-eth-overhead

!

qos map 70Meg 10

  match any

  shape average 73220000 burst 1200000 count-eth-overhead

!

qos map 80Meg 10

  match any

  shape average 83932000 burst 1200000 count-eth-overhead

!

qos map 90Meg 10

  match any

  shape average 94140000 burst 1200000 count-eth-overhead

!

qos map 100Meg 10

  match any

  shape average 146440000 burst 1200000 count-eth-overhead

!

!

no ethernet cfm

!

interface gigabit-eth 0/1

  description xxxxxxxxxxxxxxxx

  speed 100

  ip address  xxxxxxxxxxxxxxxxxx

  ip flow ingress

  ip flow egress

  bandwidth 20900

  max-reserved-bandwidth 100

  qos-policy out 20Meg-QOS

  no shutdown

  no lldp send-and-receive

!

!

interface gigabit-eth 0/2

  description LAN BLOCK

  speed 100

  ip address  10.220.0.21  255.255.255.240

  ip flow ingress

  ip flow egress

  qos-policy in setprecedence

  no shutdown

  no lldp send-and-receive

ip access-list extended LW-Data

  permit tcp any  10.1.0.0 0.0.1.255 eq www

  permit tcp any  10.1.0.0 0.0.1.255 eq https

  permit tcp any  10.1.0.0 0.0.1.255 eq 1494

  permit tcp any  10.1.0.0 0.0.1.255 eq 2598

  permit tcp any  10.1.2.0 0.0.0.255 eq 2598

  permit tcp any  10.98.0.0 0.0.1.255 eq www

  permit tcp any  10.98.0.0 0.0.1.255 eq https

  permit tcp any  10.98.0.0 0.0.1.255 eq 1494

  permit tcp any  10.98.0.0 0.0.1.255 eq 2598

  permit tcp any  10.100.10.0 0.0.0.255 eq 1494

  permit tcp any  10.100.10.0 0.0.0.255 eq www

  permit tcp any  10.100.10.0 0.0.0.255 eq https

  permit tcp any  10.100.10.0 0.0.0.255 eq 2598

  permit tcp any  10.101.10.0 0.0.0.255 eq 2598

  permit tcp any  10.103.1.0 0.0.0.255 eq www

  permit tcp any  10.103.1.0 0.0.0.255 eq https

  permit tcp any  10.103.1.0 0.0.0.255 eq 1494

  permit tcp any  10.103.1.0 0.0.0.255 eq 2598

!

ip access-list extended LW-Signal

  permit tcp any  10.100.100.0 0.0.0.255

  permit udp any  10.100.100.0 0.0.0.255

!

ip access-list extended LW-Video

  permit ip any  10.105.0.0 0.0.0.255

  permit ip any  10.100.100.238 0.0.0.1

  permit ip any  10.100.100.240 0.0.0.3

  permit ip any  10.100.100.150 0.0.0.1

  permit ip any  host 10.100.100.152

  permit ip any  host 10.100.100.244

  permit ip any  host 10.1.2.239

  permit udp any  172.27.50.0 0.0.0.255 range 3230 3235

  permit tcp any  172.27.50.0 0.0.0.255 range 3230 3235

!

ip access-list extended LW-Voice

  permit tcp any  10.100.100.0 0.0.0.255

  permit udp any  10.100.100.0 0.0.0.255

_____________________________________________________________________

KS-Leavenworth#sh ip access-lists

* - Indicates access list entry disabled by track.

Extended IP access list LW-Data

   permit tcp any  10.1.0.0 0.0.1.255 eq www   (10 matches)

   permit tcp any  10.1.0.0 0.0.1.255 eq https   (0 matches)

   permit tcp any  10.1.0.0 0.0.1.255 eq 1494   (0 matches)

   permit tcp any  10.1.0.0 0.0.1.255 eq 2598   (903 matches)

   permit tcp any  10.1.2.0 0.0.0.255 eq 2598   (913 matches)

   permit tcp any  10.98.0.0 0.0.1.255 eq www   (6154 matches)

   permit tcp any  10.98.0.0 0.0.1.255 eq https   (30 matches)

   permit tcp any  10.98.0.0 0.0.1.255 eq 1494   (0 matches)

   permit tcp any  10.98.0.0 0.0.1.255 eq 2598   (2290 matches)

   permit tcp any  10.100.10.0 0.0.0.255 eq 1494   (0 matches)

   permit tcp any  10.100.10.0 0.0.0.255 eq www   (3 matches)

   permit tcp any  10.100.10.0 0.0.0.255 eq https   (0 matches)

   permit tcp any  10.100.10.0 0.0.0.255 eq 2598   (0 matches)

   permit tcp any  10.101.10.0 0.0.0.255 eq 2598   (0 matches)

   permit tcp any  10.103.1.0 0.0.0.255 eq www   (81524 matches)

   permit tcp any  10.103.1.0 0.0.0.255 eq https   (281 matches)

   permit tcp any  10.103.1.0 0.0.0.255 eq 1494   (0 matches)

   permit tcp any  10.103.1.0 0.0.0.255 eq 2598   (0 matches)

Extended IP access list LW-Signal

   permit tcp any  10.100.100.0 0.0.0.255    (0 matches)

   permit udp any  10.100.100.0 0.0.0.255     (0 matches)

Extended IP access list LW-Video

   permit ip any  10.105.0.0 0.0.0.255     (80858 matches)

   permit ip any  10.100.100.238 0.0.0.1     (0 matches)

   permit ip any  10.100.100.240 0.0.0.3     (0 matches)

   permit ip any  10.100.100.150 0.0.0.1     (0 matches)

   permit ip any  host 10.100.100.152     (0 matches)

   permit ip any  host 10.100.100.244     (0 matches)

   permit ip any  host 10.1.2.239     (0 matches)

   permit udp any  172.27.50.0 0.0.0.255 range 3230 3235    (0 matches)

   permit tcp any  172.27.50.0 0.0.0.255 range 3230 3235   (0 matches)

Extended IP access list LW-Voice

   permit tcp any  10.100.100.0 0.0.0.255    (1065090 matches)

   permit udp any  10.100.100.0 0.0.0.255     (1772 matches)

____________________________________________________________________________

LW#sh qos map interface gigabit-ethernet 0/1

giga-eth 0/1

  qos-policy out: 20Meg-QOS

   map entry 10

     match any

     class shape rate: 20900 (kilobits/sec), average

     budget: 1200000/1200000 bytes (current/max)

     2612 bytes added to budget every 1 ms

     packets sent: 2779488

     packets waiting: 0

     packets dropped: 0

     packets delayed: 0

     qos submap Template-4

         submap entry 10

           match precedence 5

           priority bandwidth: 59 (% of total)

           burst budget 308221/308275 bytes (current/max)

           packets matched: 1060389, bytes matched: 93141280

           packets dropped: 0, bytes dropped: 0

           5 minute offered rate 110032 bits/sec, drop rate 0 bits/sec

         submap entry 20

           match precedence 2

           match precedence 3

           class bandwidth:  15 (% of total)

           conversation: 244

           packets matched: 10320, bytes matched: 1603060

           packets dropped: 0, bytes dropped: 0

           5 minute offered rate 2032 bits/sec, drop rate 0 bits/sec

         submap entry 30

           match precedence 0

           match precedence 1

           class bandwidth:  14 (% of total)

           conversation: 245

           packets matched: 1505349, bytes matched: 183414546

           packets dropped: 0, bytes dropped: 0

           5 minute offered rate 208496 bits/sec, drop rate 0 bits/sec

         submap entry 40

           match precedence 4

           match precedence 6

           match precedence 7

           class bandwidth:  10 (% of total)

           conversation: 246

           packets matched: 203421, bytes matched: 15979266

           packets dropped: 0, bytes dropped: 0

           5 minute offered rate 11704 bits/sec, drop rate 0 bits/sec

         submap entry default

           packets matched: 10, bytes matched: 420

           packets dropped: 0, bytes dropped: 0

           5 minute offered rate 0 bits/sec, drop rate 0 bits/sec

  Input QoS Map not assigned for this interface

Labels (2)
Tags (2)
0 Kudos
Reply
6 Replies
Anonymous
Not applicable
‎10-23-2014 12:59 PM

Re: QoS Config Check

erich:

Thank you for asking this question in the support community!

I will be happy to verify your QoS configuration, but when you get a chance, can you explain what you would like to accomplish, so I can attempt to determine if the configuration will satisfy that goal?

Also, here is the Configuring QoS in AOS for reference.

Levi

0 Kudos
Accept as Solution Reply
erich
New Contributor
‎10-27-2014 12:04 PM

Re: QoS Config Check

I'm just trying to ensure that the types of traffic to the specific subnets defined in my ACL's will get the guaranteed bandwidth.

I have since taken out a few of the match statements in the " qos map setprecedence XX " areas to be more granular and ensure that only the traffic I want is what matched the Qos.

It looks like it is working but again, I am use to Cisco and not Adtran.

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎10-28-2014 12:52 PM

Re: QoS Config Check

erich:

Based on the configuration example you submitted, only two of the ACLs will be used as match criteria (see below).  As you can see, you are applying an inbound QoS map (setprecedence) and an outbound QoS map (20Meg-QOS) to the interfaces. 

interface gigabit-eth 0/1

  qos-policy out 20Meg-QOS

!

interface gigabit-eth 0/2

  qos-policy in setprecedence

The inbound QoS map matches the following criteria and sets the corresponding precedence value.

qos map setprecedence 10

  ! Implicit deny any

  set precedence 7

qos map setprecedence 20

  match dscp 48

  match dscp cs6

  set precedence 6

qos map setprecedence 30

  match dscp ef

  match ip list LW-Voice

  set precedence 4

qos map setprecedence 40

  match dscp af41

  match ip list LW-Video

  match precedence 3

  set precedence 2

qos map setprecedence 50

  match dscp 25

  match dscp 26

  match dscp 24

  match dscp af31

  match dscp cs3

  match ip list LW-Signal

  set precedence 6

qos map setprecedence 60

  match dscp af21

  match ip list LW-Data

  set precedence 5

qos map setprecedence 70

  match dscp 10

  match dscp 8

  match dscp af11

  match dscp cs1

  set precedence 1

qos map setprecedence 80

  match dscp 0

  set precedence 0

The outbound QoS map matches "any" traffic and sets the traffic-shaping rate:

qos map 20Meg 10

  match any

  shape average 20900000 burst 1200000 count-eth-overhead

Please, let me know what specific questions you have.  I will be happy to help in any way I can.

Levi

0 Kudos
Accept as Solution Reply
erich
New Contributor
‎10-28-2014 03:07 PM

Re: QoS Config Check

So if I add the following will this accomplish what I am looking for, and do I need to remove the " match ip list " from the " qos map setprecedence XX "?

qos map 20Meg-QOS 10

  match ip list LW-Data

  match ip list LW-Signal

  match ip list LW-Voice

  match ip list LW-Video

  shape average 20900000 burst 1200000 count-eth-overhead

  qos-policy Template-4

And remove the ones in Bold

qos map setprecedence 30

  match dscp ef

  match ip list LW-Voice

  set precedence 4

qos map setprecedence 40

  match dscp af41

  match ip list LW-Video

  match precedence 3

  set precedence 2

qos map setprecedence 50

  match dscp 25

  match dscp 26

  match dscp 24

  match dscp af31

  match dscp cs3

  match ip list LW-Signal

  set precedence 6

qos map setprecedence 60

  match dscp af21

  match ip list LW-Data

  set precedence 5

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎11-03-2014 11:24 AM

Re: QoS Config Check

erich:

If you use the outbound QoS map that you have listed:

qos map 20Meg-QOS 10

  match ip list LW-Data

  match ip list LW-Signal

  match ip list LW-Voice

  match ip list LW-Video

  shape average 20900000 burst 1200000 count-eth-overhead

  qos-policy Template-4

!

qos map Template-4 10

  match precedence 5

  priority percent 59

qos map Template-4 20

  match precedence 2

  match precedence 3

  bandwidth percent 15

qos map Template-4 30

  match precedence 0

  match precedence 1

  bandwidth percent 14

qos map Template-4 40

  match precedence 4

  match precedence 6

  match precedence 7

  bandwidth percent 10

This QoS map will match any of the ACLs in the "match" section and provide a total of 20 Mbps.  Furthermore, the sub-policy or child map "Template-4" will match the various precedence values configured and give that traffic portions of the 20 Mbps. 

Previously, you stated the goal of the QoS map was "I'm just trying to ensure that the types of traffic to the specific subnets defined in my ACL's will get the guaranteed bandwidth."  From my understanding of your goal, you will not need the child map, since you only want to ensure traffic matching the ACLs get the required bandwidth.

Please, let me know what other questions you have.

Levi

0 Kudos
Accept as Solution Reply
erich
New Contributor
‎11-03-2014 11:41 AM

Re: QoS Config Check

For some of the traffic that the ACL's reference they only require a specific amount of bandwidth.

So I assigned them to the various areas after setting the precedence

Video 768k

qos map setprecedence 40

  match dscp af41

  match ip list LW-Video

  match precedence 3

  set precedence 2

Voice 232k

qos map Template-4 40

  match precedence 4

  match precedence 6

  match precedence 7

  bandwidth percent 10

Signal 80k

qos map setprecedence 50

  match dscp 25

  match dscp 26

  match dscp 24

  match dscp af31

  match dscp cs3

  match ip list LW-Signal

  set precedence 6

Data is king so I put it in the 59% section.

qos map setprecedence 60

  match dscp af21

  match ip list LW-Data

  set precedence 5

0 Kudos
Accept as Solution Reply