Adtran
Help
Attention! The Adtran support community will be placed in read-only mode on Monday, January 20th, at 8 AM CST for system maintenance. During this time, new posts, replies, or other content updates will be unavailable. The system will return to normal functionality by 9 AM CST on Tuesday, January 21st. If you encounter any product issues during this read-only period, you can reach out to Adtran support at any time. Thank you!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cbycondo
New Contributor
‎01-06-2018 07:45 PM

SNMP Requests to 4430 are timing out

I have a 4430 R12.3.3  running as my router between my LAN and the Internet. On both the WAN & LAN side the connection is Copper GigE.

I am seeing SNMP requests that I use to track utilization of the router interfaces time out occasionally, usually when load is higher.

My software making SNMP requests uses a 1 second timeout and retries 5 times.

Peak loads are about 120-150 MB/sec going WAN to LAN.

As anyone seen this and what is the best way to work around issue?

0 Kudos
Reply
1 Reply
cbycondo
New Contributor
‎01-18-2018 06:06 PM

Re: SNMP Requests to 4430 are timing out

The problem was not a timeout but the 32 bit counter rolling over on my high speed Giga interfaces.  I switched my network monitor to use SNMP 2 and the 64 bit counters and the problem was solved.

0 Kudos
Accept as Solution Reply