cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mitchmax100
New Contributor

NV5660 support dot11ap access-point-control/802.11bg?

Hello All,

I currently have a customer on a 3rd gen TA908e router with dot11ap access-point-control configured for the NV160's. I'm building the new config for them on a NV5660 and don't seem to have the option to create the controller. I've worked as much google fu as I could and can't seem to find anything about the NV5660's supporting 802.11bg. Does the NV5660 support the AP controller?

Labels (1)
0 Kudos
2 Replies
michael56
New Contributor III

Re: NV5660 support dot11ap access-point-control/802.11bg?

Unless Adtran has upgraded their firmware, the NV5660 (although the command is there) does not support the NV160 WAP devices.

However, if the feature was enabled, the AC controller build for the NV160 would be built the same in the NV5660 as it is in other Adtran routers.

mitchmax100
New Contributor

Re: NV5660 support dot11ap access-point-control/802.11bg?

Hello michael56,

Thanks for the gponian response! I did manage to find a firmware version that supports the dot11ap access-point-control on the NV5660. With NV5660A-R11-10-6-E.biz I was able to apply the dot11ap access-point-control command and the dot11ap interfaces built no problamo!