Adtran Cut-sheet Templates for IP switches and IPBG

[nec_ucaas]

Hi

I wonder if there is any Excel Sheet templates (or any other format) for collecting data that later on can be used to stage a IP switch and/or IP Business Gateways

I mean,

say in the case of an PoE switch, a template we could use as cut-sheet document where

we could collect all the VLAN information, what interface is associated to what VLAN, what is the speed, mode of the interface, VoIP settings etc,

Then later use that information to prepare/configure the actual switch

RR

Element ID

Hostname

interface

VLAN_Name

VLAN_ID

TrafficType

Speed

Duplex

switchport mode

channel-group

portfast

RR

Device

DeviceName

Slot/Port

Rack 1

Adtran PoE 01

luv_PoE_xxxx-1

Gi 1/1

XXXX

100

OAM

access

portfast

Rack 1

GSX A1080a-1

luv_gsx_01

net 0

And not only for the L2/L3 switches but also for the TA904|924|6240 etc to include FXS|FXO|PRI|SIP Trunks etc information

Is there anything like it available ?

[Anonymous]

Francisco,

We do not have any templates like you are describing.  However, we can leave this thread open for a couple weeks to see if any other users have something you can use.

Thanks!

David

[Anonymous]

Francisco,

I went ahead and flagged this post as "Assumed Answered" since I assume you have developed your own template. This post will still live on this forum in case someone else would like to post related information.

Thanks!

David