Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎11-27-2013 09:35 AM

How do I set up a 6355 with two WAN connections, one for the Voice VLAN, and one for the Data VLAN, this is for a application using hosted PBX

Also, when I set up the router, How do I disable NAT so that my Hosted PBX works.

Tags (3)
0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎12-10-2013 03:17 PM

Re: How do I set up a 6355 with two WAN connections, one for the Voice VLAN, and one for the Data VLAN, this is for a application using hosted PBX

Roxy538,

Thanks for posting!  If you want to keep your WAN connections exclusive to each VLAN, you might want to consider implementing a VRF for the data VLAN and its WAN connection.  Generally speaking, you will want make sure your voice traffic is in the default VRF so that SIP proxy features are available.  The guide, Configuring Multi-VRF in AOS is a guide which goes over this feature.

Regarding your question about disabling NAT, this feature is only turned on if it is configured on the unit.  In other words, NAT is disabled by default, so you might only want to configure it on the VLAN interface used by the data VLAN devices.  For information regarding firewall policies and setting up rule, see Configuring the Firewall (IPv4) AOS.  If you have any other specific questions, feel free to respond on this thread.

Thanks!

David

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎01-03-2014 04:16 PM

Re: How do I set up a 6355 with two WAN connections, one for the Voice VLAN, and one for the Data VLAN, this is for a application using hosted PBX

Roxy538,

I went ahead and flagged this post as "Assumed Answered".  If the response on this thread assisted you, please mark it as Correct or Helpful as the case may be with the applicable buttons.  This will make it visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Thanks!

David

0 Kudos
Accept as Solution Reply