I have a customer who has an Intervoice ivr to an adtran to covert to b8zs then across a T1 cas/rbs to a netvanta 6250.
They can call into the sip side and it completes the call and pushes the call out the T1.
The customer can not make outbound calls.
Thanks in advance,
Mike
I see his digits come across then I get the following:
...( I see all 10 digits come in)
18:03:47.560 TONESERVICES.EVENTS t1 0/4.22 - Dsp 0/1.3 - Tone Detection: received digit (1) event
18:03:47.561 TRKPORT.00:04:22 00:04:22 Digit Received -1
18:03:47.720 TONESERVICES.EVENTS t1 0/4.22 - Dsp 0/1.3 - Tone Detection: received digit (0) event
18:03:47.721 TRKPORT.00:04:22 00:04:22 Digit Received -0
18:03:51.721 TM.T06 22 GetDID - Tism_call(FAIL)
....
interface t1 0/3
description T1 to customer PBX (10 Digit DNIS)
alias SPECTRUM_IF_ALIAS_113fdbfd
tdm-group 1 timeslots 1-24 speed 64
no shutdown
interface t1 0/4
description T1 to customer PBX
alias SPECTRUM_IF_ALIAS_113fdbfe
tdm-group 1 timeslots 1-24 speed 64
no shutdown
voice trunk T05 type t1-rbs supervision fgd role network
description "T1 CAS to Customer PBX 10 Digit DNIS"
fgd inbound-address
connect t1 0/3 tdm-group 1
rtp delay-mode adaptive
!
voice trunk T06 type t1-rbs supervision fgd role network
description "T1 CAS to Customer PBX"
resource-selection linear ascending
fgd inbound-address
connect t1 0/4 tdm-group 1
match dnis "N$" substitute "$"
rtp delay-mode adaptive
voice grouped-trunk SIP
resource-selection circular
trunk T01
trunk T02
accept 1-XXX-XXX-XXXX cost 0
accept XXX-XXX-XXXX cost 0
accept 011$ cost 0
accept $ cost 0 ( I added this just to make sure it would accept all numbers)
reject NXX-976-XXXX
reject 1-900-NXX-XXXX
reject 1-976-NXX-XXXX
permit list TDM
!deny all other trunks
!deny all other ani
voice grouped-trunk TDM
description "9 Digit DNIS TDM Trunk Group"
trunk T06
accept (a 10 digit number) cost 0
(about 120 accept xxx-xxx-xxxx numbers)
permit list SIP
!deny all other trunks
!deny all other ani