cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Contributor II
Contributor II

Call Pickup Feature not working-Calls get dropped

Jump to solution


Hi all,

At one of our sites, users are unable to pickup an incoming call using the Call Pickup feature.

Initially, they were attempting to pickup incoming calls using *52+4100*.  Ext 4100 is a member of the Ring Group.  As they dialed in the code, the LCD display would show the Caller ID of the calling party (so the incoming call was apparently transferred); however, the call would be dropped soon after displaying the phone number of the caller.  As a workaround, I created a Pickup Group and added Ext 4100 and 4111 along with two others and assigned it the extension 4101.  When staff dials 4101 as a call is coming in the same thing happens.

I have attempted power-cycling the switch as well and have verified that Call Pickup is enabled under COS.  Attached is a debug file taken while I dialed the site's number using my cell phone and instructed staff at Ext 4111 to attempt picking up the call by dialing 4101 (Pickup Group Ext).

Thx for the help,

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Valued Contributor
Valued Contributor

Re: Call Pickup Feature not working-Calls get dropped

Jump to solution

Juad, that version of code contains a known issue with using a pickup group on a an incoming call from a ring group. Please upgrade the 7100 to A4.12. Instructions on doing so are contained here:

https://supportforums.adtran.com/docs/DOC-1672

View solution in original post

0 Kudos
5 Replies
Highlighted
Valued Contributor
Valued Contributor

Re: Call Pickup Feature not working-Calls get dropped

Jump to solution

Juad, what version of AOS are you running on your 7100?

Highlighted
Contributor II
Contributor II

Re: Call Pickup Feature not working-Calls get dropped

Jump to solution

Hi Jay,

The switch is using A4.03.00.SC.E.

Thx.

Highlighted
Valued Contributor
Valued Contributor

Re: Call Pickup Feature not working-Calls get dropped

Jump to solution

Juad, that version of code contains a known issue with using a pickup group on a an incoming call from a ring group. Please upgrade the 7100 to A4.12. Instructions on doing so are contained here:

https://supportforums.adtran.com/docs/DOC-1672

View solution in original post

0 Kudos
Highlighted
Contributor II
Contributor II

Re: Call Pickup Feature not working-Calls get dropped

Jump to solution

Thx Jay,

Should I be concerned about any new issues coming up after the upgrade?...can I expect all previously configured settings to remain the same after the upgrade?

Highlighted
Valued Contributor
Valued Contributor

Re: Call Pickup Feature not working-Calls get dropped

Jump to solution

Juad, for an upgrade from A4.03 to A4.12, you should not expect to see any changes to your settings provided the steps are followed. It is always a good idea to save a copy of your config before performing an upgrade.