cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cahollow
New Contributor III

Custom Ringtone setting only applies to extension to extension calls

Jump to solution

Good morning!

I'm having an issue on our Netvanta 7100 and custom ringtones.  The affected phones are Polycom VVX 600 and 410s.

The issue is this:  users can set a custom ring on their phones and this setting applies on extension to extension calls but NOT on calls that come in to their DID or calls that are delivered from the Auto Attendant.

We really want these settings to apply to the phone for any call that comes in to it.  Is there something I'm missing here?  I am happy to provide any configuration or debugs needed.

Labels (2)
0 Kudos
1 Solution

Accepted Solutions
cahollow
New Contributor III

Re: Custom Ringtone setting only applies to extension to extension calls

Jump to solution

I ended up having to open a support ticket about this.  In the end we came up with a workaround to resolve the problem and I have included this below:

"Colin, engineering says the system is working as designed since external calls are supposed to have a distinctive ring. I wrote up a header manipulation script that will strip the alert from the INVITE and not override the phone config. Please add this from the global config prompt:"

hmr policy CustomRing

  rule-set CustomRing 5

!

hmr rule-set CustomRing

  message-rule StripAlert message-type request 5

    remove header alert-info position first match-value Bellcore-dr2 5

sip hmr CustomRing out

View solution in original post

0 Kudos
1 Reply
cahollow
New Contributor III

Re: Custom Ringtone setting only applies to extension to extension calls

Jump to solution

I ended up having to open a support ticket about this.  In the end we came up with a workaround to resolve the problem and I have included this below:

"Colin, engineering says the system is working as designed since external calls are supposed to have a distinctive ring. I wrote up a header manipulation script that will strip the alert from the INVITE and not override the phone config. Please add this from the global config prompt:"

hmr policy CustomRing

  rule-set CustomRing 5

!

hmr rule-set CustomRing

  message-rule StripAlert message-type request 5

    remove header alert-info position first match-value Bellcore-dr2 5

sip hmr CustomRing out

View solution in original post

0 Kudos