cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

Errors in the Installation Wizard

The Installation Wizard on the 7100 seems to have a few issues:

- When 10-digit dialing is checked the dial plan shows 7-digit dialing

- The firewall setting doesn't get changed when you check PBX only

- Extension starting with 1 cannot be created.

Tags (1)
0 Kudos
Reply
4 Replies
Highlighted
Valued Contributor
Valued Contributor

Re: Errors in the Installation Wizard

Kai, what version of firmware are you running? Thanks

0 Kudos
Highlighted
New Contributor

Re: Errors in the Installation Wizard

11.4.4

0 Kudos
Highlighted
Valued Contributor
Valued Contributor

Re: Errors in the Installation Wizard

Kai, I know the 1XXX extension issue was fixed in R11.5.0 and should be in future development builds past that. Can you upgrade to R11.7.0 and test again? Thanks

0 Kudos
Highlighted
Valued Contributor
Valued Contributor

Re: Errors in the Installation Wizard

Kai,

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

  

Thanks,

Jay

0 Kudos