cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

How is an OPX line connected and treated with the NV7100?

We are replacing an analog PBX with a NV7100. The analog system has an OPX line connected to another facility down the street that also has an analog PBX. I'm thinking that the OPX is simply connected to an FXO port and treated like a trunk. Is there more to it than that?

0 Kudos
Reply
3 Replies
Highlighted
Valued Contributor II
Valued Contributor II

Re: How is an OPX line connected and treated with the NV7100?

You are correct. Assuming the far end PBX is supplying Battery (FXS), then that would come into the 7100 FXO port.

-Mark

0 Kudos
Highlighted
New Contributor

Re: How is an OPX line connected and treated with the NV7100?

Thanks Mark

0 Kudos
Highlighted
Valued Contributor
Valued Contributor

Re: How is an OPX line connected and treated with the NV7100?

Darryl,

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Jay