Adtran
Help
Attention! The Adtran support community will be placed in read-only mode on Monday, May 12, at 8 AM CST for system maintenance. During this time, new posts, replies, or other content updates will be unavailable. The system will return to normal functionality by 9 AM CST on Tuesday, May 13. If you encounter any product issues during this read-only period, you can reach out to Adtran support at any time. Thank you!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎09-05-2014 10:17 PM

Metaswitch sip Trunk - no Audio on _some_ calls

I am in the process of updating some 7100's from a sip trunk configuration that was done before the Metaswitch Interop guide came out

I am going through this process as I was never able to update beyond FW R10.6 without issues on the sip trunks, as I was using an unsupported configuration I figured I should configure via referenced document.

So updated to R10.8.1, and configured the sip trunks on the Meta and the Adtran as specified in the document.  Everything seems to work generally,  phone to phone calls work, phone to external calls work, external to phone calls work... but External calls that use FMFM or call coverage to ring external numbers will NOT work.

So call into PBX  - Call coverage - outbound call to XYZ = No Audio  Call rings can be picked up, but no audio either direction. 

Attached is a debug (sip all, voice switchboard).

/thanks

/rh

Labels (1)
Labels
Tags (2)
Adtran-Meta-CC no work.txt.zip
Reply