cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
rodnet
New Contributor II

setting up a new extension

Jump to solution

we just hired a new person so a got a phone from the back and setup an extension for her the phone works fine for incoming calls and outgoing to office phones, but it wont do any outbound calls outside the office any ideas?

the phone is sound point ip 430

and our pbx is NetVanta 7100

Thanks

Rodney

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
rodnet
New Contributor II

Re: setting up a new extension

Jump to solution

Yes the issue is resolved after doing a reboot of the PBX the issue was resolved thanks for the follow up.

View solution in original post

0 Kudos
3 Replies
Anonymous
Not applicable

Re: setting up a new extension

Jump to solution

Rodney - You may want to check the COS-Class of Service settings for this user to make sure they can dial an outside number. If that is set fine and same as other users who can dial outside, then you may want to check how this user is different from the other users on the system.

Thanks,

Anonymous
Not applicable

Re: setting up a new extension

Jump to solution

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Matt

rodnet
New Contributor II

Re: setting up a new extension

Jump to solution

Yes the issue is resolved after doing a reboot of the PBX the issue was resolved thanks for the follow up.

0 Kudos