Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎11-20-2013 02:49 PM

Polycom MSG Key with Uc Server

Jump to solution

Hi,

We have some problem with polycom 335 and Uc server. After upgrading to the UC serveur (BCS) the MSG Key on the phone when you have new message does not appears. But, the message lights indicator works well. If I want the KEY on the phone, what I need to do?

Thank You

Alex

Labels (2)
Labels
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎01-07-2014 10:14 AM

Re: Polycom MSG Key with Uc Server

Jump to solution

Alex,

It appears you opened a support ticket for this issue and the resolution was correcting the IP address that was configured for the NetVanta 7100 under Communications Systems in the UC client to match the IP interface on the NetVanta 7100 configured for the media-gateway.  I went ahead and marked this post with a Correct Answer.

Thanks,

Matt

View solution in original post

0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎11-22-2013 05:37 PM

Re: Polycom MSG Key with Uc Server

Jump to solution

Alex,

Does this happen with all phones or just one? Try factory defaulting the phone by holding down 1, 3, 5, and 7 upon power up.  When prompted for a password enter 456.  What version of UC was running before the upgrade and currently?  Also, what firmware version is loaded on the phone?

Thanks,

Matt

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎01-07-2014 10:14 AM

Re: Polycom MSG Key with Uc Server

Jump to solution

Alex,

It appears you opened a support ticket for this issue and the resolution was correcting the IP address that was configured for the NetVanta 7100 under Communications Systems in the UC client to match the IP interface on the NetVanta 7100 configured for the media-gateway.  I went ahead and marked this post with a Correct Answer.

Thanks,

Matt

0 Kudos
Reply