SDX622V -- DC Barrel Input Specifications

[EmComm]

Hello,

I am in need of the DC barrel input specifications (i.e 5.5mm x 2.1mm, etc) for the SDX622V.

Thanks

[BMullar]

EMCOMM,

Are you looking for part numbers to use for a battery backup when using the FXS port on the SDX 622V?  If yes, then Adtran part number 1287406F2 - SDX ###V UPS w/ Battery Backup w/Phoenix Connector and 1287406F3 - SDX UPS to ONT Power Cable 2' w/Phoenix and Barrel 5.5mm x 2.1mm Connectors.

Regarding specs the only other thing I can think of is a 12VDC input to the SDX 622V.

Hope this helps.

Regards,

BMULLAR

[ronp]

5.5mm (OD), 2.5mm (ID), 10mm (L)  I use CTI# 25-2088SS (120vac >12vdc 1.5amp 5.5*2.5*12.0mm) which are 12mm Long, but they work fine. Ron