The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
 | Article ID: 1528 |
| Q&A | |
What are the DTE Leads for the HSSI Port on the T3SU 300 and OSU 300?
Q: What are the DTE Leads for the HSSI Port on the T3SU 300 and OSU 300?
A:
| Abbreviation | Meaning | Purpose and Configuration |
| TA | Terminal Available | Asserted by the DTE to indicate readiness to transmit data. |
| CA | Communications Equipment Available | Asserted by the T3SU 300 or OSU 300 to indicate readiness to transmit data. |
| TM | Test Mode | Asserted by the T3SU 300 or OSU 300 when either the network or the port is being tested |
| LA | Loopback circuit A | The condition reflected by this lead is dependent on the LB lead. See table below. |
| LB | Loopback circuit B | The condition reflected by this lead is dependent on the LA lead. See table below. |
| LC | Loopback circuit C | Asserted by the unit to request a loopback from the DTE. |
LA and LB Leads
| LA | LB | Condition |
| Off | Off | No Test (normal) |
| On | Off | Local Line loopback |
| Off | On | Remote Line loopback |
| On | On | Local DTE loopback |
