cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
c99hrisb
New Contributor

600r bypass password

What is the procedure to bypass the password on the 600r, on boot up hitting ESC does nothing as well as the space bar?

I am connected to the craft port and get a login prompt for password.

Thanks

Chris

0 Kudos
1 Reply
Anonymous
Not applicable

Re: 600r bypass password

Thank you for using the ADTRAN Support Community Forums.

The TA600r is not an AOS product, so the "bypass password" procedure does not work on it. To get into bootstrap, you can hold down the "b" key while powering it up. This will allow you to upgrade the FW but little else. If you want to factory default the unit, you can hold down the "f" key on boot-up.

At the LOGIN prompt, have you tried just hitting <ENTER>, or using "password"?

If you do not want to factory default the unit, there is a challenge/response procedure you can go through to restore the default password (which is "password"). You will have to call ADTRAN Support (888-423-8726) to go through the challenge/response procedure.

Thank you,

Patrick