cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
simondavidkelly
New Contributor

MIBs for the Total Access 600

Hi,

I'm developing an alarm interface to recieve traps from the TA600 and I have been supplied a set of MIBs from the customer that have SNMPv2 NOTIFICATION-TYPE traps in the adladvo1.mib and adladSys.mib, along with the manuals with the alarm descriptions. However, when testing alarms were coming in as SNMPv1 TRAP-TYPE.

Has the customer setup the device incorrectly, if yes where should I be looking to swith to SNMPv2 alarms.

Have I got the correct MIBs from them, if not where can I get the TA600 mib set from?

Cheers

Simon

0 Kudos