- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2 PRI setup with no outbound audio if both PRI's are up. Two way audio when one or the other is down
Customer has one way audio outbound only when both PRI'2 are no shut. If you shutdown one or the other the audio is fine
Current system image file is "T900E3A-R11-10-4-E.biz"
Platform: Total Access 900e (3rd Gen), part number 4243924L8
interface t1 0/3
description PRI T1
tdm-group 1 timeslots 1-16,24 speed 64
no shutdown
!
interface t1 0/4
description PRI T1
tdm-group 1 timeslots 1-16,24 speed 64
no shutdown
!
!
interface pri 1
isdn name-delivery setup
connect t1 0/3 tdm-group 1
no shutdown
!
interface pri 2
isdn name-delivery setup
connect t1 0/4 tdm-group 1
no shutdown
voice trunk T02 type isdn
description "PRI CONNECTION"
resource-selection circular descending
busy-out monitor track WANTRACK
connect isdn-group 1
no early-cut-through
modem-passthrough
rtp delay-mode adaptive
codec-list 729-711
!
voice trunk T03 type isdn
description "PRI CONNECTION"
resource-selection linear ascending
busy-out monitor track WANTRACK
connect isdn-group 2
modem-passthrough
rtp delay-mode adaptive
codec-list 729-711
voice grouped-trunk "SIP TRUNK GROUP FAX"
trunk T30
accept $ cost 0
permit list FAXUsers
!deny all other trunks
!deny all other ani
!
!
voice grouped-trunk "SIP TRUNK GROUP"
trunk T25
accept $ cost 100
deny list FAXUsers
permit list AllUsers
!deny all other trunks
!deny all other ani
!
!
voice grouped-trunk PRI
trunk T02
trunk T03
accept $ cost 0
!
!
voice grouped-trunk "SIP TRUNK GROUP FWD"
trunk T35
accept $ cost 0
deny list FAXUsers
permit list AllUsers
!deny all other trunks
!deny all other ani