cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jkesting
New Contributor

900 vs 900e series

Jump to solution

Can a ta 900 series do PRI or is that limited to the 900e series?  T1 ports 3 and 4 on the back of the e-series are labeled as PRI/CAS ports but I do not see that label on the non e-series.  I seem to recall trying it on a non e-series but not being able to get it working.

0 Kudos
1 Solution

Accepted Solutions
ujjvalkoul
New Contributor II

Re: 900 vs 900e series

Jump to solution

Yes, 900 series can do a single PRI/CAS to a Traditional PBX.

On Sun, Feb 23, 2014 at 10:31 PM, jkesting <

View solution in original post

0 Kudos
4 Replies
ujjvalkoul
New Contributor II

Re: 900 vs 900e series

Jump to solution

Yes, 900 series can do a single PRI/CAS to a Traditional PBX.

On Sun, Feb 23, 2014 at 10:31 PM, jkesting <

View solution in original post

0 Kudos
jkesting
New Contributor

Re: 900 vs 900e series

Jump to solution

Do you know which T1 port on the 900 series will do PRI?

ujjvalkoul
New Contributor II

Re: 900 vs 900e series

Jump to solution

One marked DSX-1

[image:

http://blog.tmcnet.com/blog/tom-keating/images/adtran-total-access-908-bk.jpg]

From: jkesting

Sent: Monday, February 24, 2014 8:04 AM

To: Ujjval Karihaloo

Subject: Re: - 900 vs 900e series

ADTRAN Support Community <https://supportforums.adtran.com/index.jspa>900

vs 900e series

created by jkesting <https://supportforums.adtran.com/people/jkesting>

in *Total

Access 900/900e Series* - View the full

discussion<https://supportforums.adtran.com/message/13196#13196>

Anonymous
Not applicable

Re: 900 vs 900e series

Jump to solution

Hello,


I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Geoff