cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

908E Configured as a PRI No Calls

Today we have a Adtran 908E 3rd Gen sharing a 25x3 COAX circuit that we have configured as a PRI.  Over the last several weeks the client is not able to make or receive calls, once we reboot the Adtran calls start working again.  Within the traffic Monitor we see spikes at the time they can not receive or make calls.  Any suggestion on correcting this issue or what we can check?

Labels (1)
0 Kudos
Reply
1 Reply
Valued Contributor
Valued Contributor

Re: 908E Configured as a PRI No Calls

Denise, I would suggest opening a ticket up with support if you have not already. This is likely going to require some debug set up to run in the background while waiting for the issue to occur again. Thanks

Jay

0 Kudos
Reply