BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
sm8651
New Contributor II

908e 3rd gen, Dual Wan And Vlan on LAN

Does anyone have a config to setup the following (908e 3rd Gen)

WAN

Ethernet 0/1 Primary

Gig 0/1 backup

 

LAN

Ethernet 0/2 - Vlan with Dhcp and route thru wan. (for local network equipment).

1 Reply

Re: 908e 3rd gen, Dual Wan And Vlan on LAN

Thanks for posting. Linked below are some of our configuration guides that should walk through how to get a dual WAN setup configured with dynamic failover implemented and how to get a LAN facing 802.1Q interface configured and NAT overload to pass traffic from the LAN to WAN. 

 

Configuring Multiple WAN Connection Failover in AOS - ADTRAN Support Community

[Video] - How to Configure 802.1Q Interfaces on an ADTRAN Router - ADTRAN Support Community

[video] Configuring Internet Access (Many to one NAT) with the Firewall Wizard in AOS - ADTRAN Suppo...

ADTRAN Product Support Engineer
888-423-8726