908e and 6310 FXO ports

[Anonymous]

How can I test the FXO ports on a 908e or 6310 router?

[Anonymous]

Hello and thank you for posting to our forum,

The best way to test calls in/out the FXO port is by using a Test Set with analog capabilities.  This way the Test Set can act like the Central Office and will send and receive calls out the FXO port.  Another way would be to use an ADTRAN Atlas unit or 2 Channel Banks to interface with the FXO port and switch calls back and forth.

Once you have the equipment connected to the FXO port, you can use the show command:

"show int fxo 0/0"  (or 0/1, 0/2, etc. depending on the ADTRAN unit) to check the on-hook and off-hook conditions

Let me know if you need any configuration assistance with testing.

Regards,

Geoff

[Anonymous]

Hello,

I went ahead and flagged this post as "Assumed Answered". If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Geoff