908e call forward failing to Taqua T7

[kbealjr]

Apparently the Taqua T7000 does not recognize * codes on a sip trunk from a sip endpoint.  I am using a 908e 3rd gen to provide fxs trunks here in our office.  I would like to call forward 1 of those fxs (which registers as a sip subscriber in the T7) to a external number.  The 908e takes and sets the call forward just as it is supposed to but I am getting a 403 forbidden from the Taqua switch.  I have a ticket open with the folks at Taqua on this but thought someone on here may have already overcome this problem.

thank you

kenny

[Anonymous]

Kenneth, have you received any additional information ftom Taqua about why the call is being rejected? Thanks

Jay

[kbealjr]

Taqua says that they are receiving a 503 service not available from the 908e. That is doing the call forward local on the 908.

Kenny

[Anonymous]

Kenny, can you please reply with the config of the 900 as well as the output of the following 3 commands running together during a failed call:

debug sip stack message

debug voice verbose

debug isdn l2-f