cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Accept SIP Calls from Multiple IPmo

I am setting up a SIP to PRI on a 924e. I need to be able to accept calls from any one of 5 IP addresses and place outbound calls to a single IP with a secondary/failover. Can someone assist me with this?  I am able to do the SIP to PRI to a single IP just not sure how to accept from many and send to one.

0 Kudos
1 Reply
jayh
Honored Contributor
Honored Contributor

Re: Accept SIP Calls from Multiple IPmo

Create five voice trunks, one for each IP. Set up registration and authentication as needed. On the one that is the primary outbound path, create a voice grouped-trunk with the appropriate outbound dial patterns and a cost of 0. On the secondary one do the same with a cost greater than 0.